Модель | Время вкл. | Интервал работы | Двигатель, Вт | Макс. подача | Макс. давление | Напряжение, В | Ток, А | Частота, Гц | Диаметр вых. отверстия | Манометр | Вязкость масла |
CEN22 Horizontal / CEN23 Vertical | 1-999 sec | 1-999 sec/min | 25W | 200 см3/мин | 15 кгс/см2 | 110 или 220 | 2.5 или 1 | 60 или 50 | 4 или 6 | опция | 32-68cSt@40℃ |
Станция смазки серии CEN22-03
1.The timer controls the operation and interval time. The electronic box has operation and interval indicators. 2.The electronic box can automatically save the original operation and interval time while the power is suddenly off.After turning on the power, it would return to the original setting time and start the cycle again.
3.It has a feed-oil button ( F button), press the button and the oil will feed immediately.
4.The выходн. volume is stable and can be adjusted by the pressure-regulating valve. Turning the valve clockwise, the oil volume will increase, and turning anticlockwise, the oil volume will reduce.
5.When the power of the lubricator turns off, the air pressure and output power will be turned off at the same time for safety.
6.It has a pressure-regulating valve, which can adjust the pressure and easy to check from the манометр.
7.It has a float switch that can detect the oil volume. It will have an automatic signal when the oil level is lower than the minimum.
8.The function of CEN22, CEN23 types are similar to CEN24 (Horizontal), CEN25 (Vertical) types. The difference is CEN24, CEN25 types are without timer, and CEN22, CEN23 types are with timers.
Application of Machines Equipment
The oil-mist type electric lubricator has cooling, lubricative and filtering effect, which can reduce wear of lubrication point. It's suitable for cutting machines and bearings.
Модель | Объем бака | Напряжение | Вых. Отверстие | Тип включения |
CEN22/23 | 03: 3л (пластик) | С: 220В, 60Гц | 2: 4мм (с манометром) | |
04: 4л (пластик) | 3: 6мм (с манометром) |