|
Model |
Motor |
Подача мах |
Давл.макс. |
Напряж. |
Pole |
Выход. Отв. |
Cyclic Вход. |
Вязкость |
|
CLS-10 |
360Вт or 730Вт |
1.5L/min |
15kgf/cm2 |
1Ø 110V 1Ø 220V 3Ø на заказ |
4 |
PT1/4 |
1〞 |
32-68cSt@40 |
Станция смазки серии CLS
1.According to the difference of flow rate, there are CLS-10, CLS-30, CLS-50 type, among them, CLS-50 has largest flow rate 4.5 L/min, please refer the Описание for details.
2.CLS type is circulating lubricator, which means the oil flows out, then comes back into the oil Бак through the cyclic Вход.. The cyclic Вход. has magnetic filter, which can block the impurities and assure the oil clean.
3.After installing and connecting the piping, feed oil till oil flows out, then start to use this lubricator.
4.It used a high quality pump that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied for large machines' request.
5.It has a pressure switch device, which assures the oil volume of lubrication point and detects if the piping works normally. The standard Описание is NC (Normal Close) contact, which means if the pressure is abnormal, it will have abnormal signal. NO (Normal Open) contact is on request.
6.It has a pressure-regulating valve, which can adjust the pressure and easy to check from the манометр.
7.It has a Реле уровняthat can detect the oil volume. It will have an automatic signal when the oil level is lower than the minimum.
8.The стандарт assemble with 360Вт motor, also can be changed to 730Вт.
9.The standard of cyclic Вход. is 3/4 inches, but can be changed to 1, 1 1/4, 1 2/1 inches on request. 10.Abuzzer can be added on request, which will alarm when the oil level is lower than the minimum.
Application of Machines Equipment
The circulating type electric lubricators could save the usage volume of oil, and have quite large выходн. volume. CLS type lubricators have cooling, lubricative and filtering effect, which can reduce wear of lubrication point. It's suitable for machinery requiring large выходн. volume or quickly operating.
Все характеристики
Отправить запрос
Описание
Характеристики
|
Модель |
Бак код |
Бак Матер. |
вместим. Литры |
Креп.отв. расстояние(m |
длина (mm) |
Ширинa (mm) |
Высот. (mm) |
Масса (kg) |
|
CLS-10 |
30 |
сталь |
30L |
300,315 |
411 |
365 |
657 |
46.3 |
|
CLS-30 |
40 |
сталь |
40L |
450,300 |
560 |
410 |
650 |
52.5 |
|
CLS-50 |
60 |
сталь |
60L |
500,300 |
610 |
415 |
690 |
75.5 |
- Комментарии
Загрузка комментариев...